1. Environmental protection： Organized discharge equipped with three times catalytic, unorganized discharge requires sealing the fore and rear of oven and recovery treatment, enamel tank and enamel barrel are all sealed.
2. Energy saving: steam and drying box are heat energy reuse type, if the wire diameter above 0.1mm, the machine will be hot air circulation equipment.
3. Noise: Adopt silent design, the relevant transmission parts (roller, take up bobbin, etc.) must be checked by dynamic balance to reduce vibration and noise.
4. Larger take up capacity: If wire diameter below 0.1mm, take up weight can reach 15Kg, which can be customized according to the client1 s requirements.
5. Automation: multi lines wire enameling machine adopts laser type takes up traverse, automatic change over and automatic tension control. The equipment is switched on without changing bobbin and stops the line when the wire become bare wire,
6. Auto-adjust the thickness of the paint film: Install a laser diameter gauge to check each line diameter before winding, and adjust the speed of the enamel roller according to the measured line diameter data size, so as to adjust the thickness of the enamel film.
7. Equipment monitoring: temperature of the oven, annealing furnace, transmission and liquid level (including oil, enamel tank, enamel applicator) devices all contain alarm function. Data of wire diameter, thickness of enamel film, take-up weight corresponding to which line can be transmitted and displayed on the computer of this machine.
8. Informatization: Real-time data such as take up weight, disconnection and change over signals, all alarm signals, power consumption and so on are connected to the local host. Data from multi-lines wire enameled machines can be connected to offices or mobile phones over the network for managers to keep abreast of the machine's performance.