Discharge without waste smell, Detection and reach the standard

We adopt the low temperature catalytic combustion method to purify the exhaust gas of the enameled machine. Catalytic combustion at a low temperature is used to treat the organic matter in the exhaust at low temperature, high efficiency, energy saving and environmental protection by the catalysis of catalyst, so as to achieve the goal of emission standards. Catalytic combustion is a typical gas-solid catalytic reaction. Catalytic combustion is a typical gas-solid catalytic reaction. Its essence is at a definite temperature, The process of catalytic oxidation of organic compounds (VOCS) adsorbed on the catalyst surface and oxygen from the air to harmless CO2 and H2O, and the release of reaction heat. With the help of a catalyst, the starting temperature of organic matter can be greatly reduced, flameless combustion can be carried out, and the preheating energy consumption and the formation of NOX can be reduced. 


1. Installation of environmental protection equipment, it is necessary to ensure the sealing of the junctions and pipelines, and do a good job of insulation measures (covering heating preservation cotton); Avoid low exhaust temperature; avoid heat loss caused by continuous heating (energy consumption) and impact on catalytic effect, and other pollution
caused by inorganic emissions.
2. Catalytic mats are consumable, under normal production conditions can be used for 1-2 years. When replacing the catalytic met, must guarantee the inner sealing. The gap between the catalytic block and the inner tank should be filled with insulation cotton, which cannot leak air. Otherwise, it will easily lead to catalytic failure.
3. When the temperature is abnormal, the thermocouple, heating pipe may be damaged, the catalyst mats poisoning or the seal is not good.Please check regularly.